PRI is dedicated to supplying our customers with the highest quality products and services available, delivered on time, with zero defects.

This is achieved through process consistency, our persistent drive to completely satisfy our customers, and our pursuit of continuous improvement.

In turn, our organization attains the growth, increased revenue, and market share necessary to afford our customers this level of quality.

Products

Super Blue 3™ is the world's ONLY wash-free transfer cylinder blanket.

Woven from polymer-based threads, SUPER BLUE 3™ is chemical resistant, heat resistant, and wear resistant. It will withstand the most rigorous ultraviolet and infrared applications while maintaining its anti-marking characteristics.

  • Absolutely Maintenance Free
  • Requires No Net Replacement
  • Easy Installation
  • Reduces Waste and Increases Profits

Go to SUPER BLUE 3 PDF

ANTIMARKING PRODUCTS

Super Blue 2® with StripeNet® is simply the best anti-marking system in the printing industry.

The patented Super Blue 2® anti-marking, anti-static system featuring StripeNet™ anti-marking, anti-static nets is a superior method of protecting the wet side of a printed sheet. It accomplishes this by preventing ink buildup on transfer and delivery positions, thus eradicating the common problem of marking.

  • Less Marking
  • Shorter Make-readies
  • More Available Press Time
  • Less Paper Waste
  • No Static Buildup

Go to SUPER BLUE 2 PDF

All the features of a SUPER BLUE 2® system in a fully integrated, disposable kit designed for today's high quality and fast paced demands.

No more net adjustments. No more net replacements. The Super Blue 2® LT™ anti-marking, anti-static system incorporates the StripeNet® anti-marking net and the base cover into a single integrated piece. Simply remove and replace when needed.

No more wasted down time cleaning your anti-marking system. The Super Blue 2® LT™ system is 100% wash free. Just take off the old one and put on a new one.

No more spray adhesives. No more messy installation procedures. Simply peel the backing off the specially formulated tape and stick it to your clean cylinder. And when it's time, it comes off without leaving that sticky residue behind.

Go to SUPER BLUE 2 LT PDF

High quality printing and coating applications in today's highly competitive printing industry demand the best in marking protection.

When it comes to protecting the wet side of the printed sheet using textured surfaces, nothing out-shines BLUE GLASS™ anti-marking film.

The unique construction of BLUE GLASS™ anti-marking film reduces marking problems associated with ink/coating build up on the surfaces of the transfer positions.

Available in thress grades in adhesive and non-adhesive rolls, cut sheets, or jackets.

When used in conjunction with SUPER BLUE 2® anti-marking, anti-static systems your entire press becomes a mark-free zone!

Go to BLUE GLASS PDF

CONSUMABLE PRODUCTS

Automatic Blanket Wash Replacement Cloth Rolls

Because Only Clean Machines
Give the Sharpest Printing!

No matter how good your presses are, any print job can be ruined if the blanket/impression cylinders are not clean. That's where Sontara® PrintMaster wash cloth comes in. It's a simple, proven solution that can cut waste, save time and raise the quality of your work.

Available for Heidelberg, Komori, KBA Koenig & Bauer, and Shinohara presses. Additional models and custom applications available. Available in individual or jumbo (500m) rolls.

Also available – Quickmaster DI (Plate Position) hydroentanglement washup rolls.

Go to ABC Rolls PDF

Multi-purpose Shop Towels / Cloth Wipes

These products are made with proprietary Dupont® fabrics making them strong, yet soft, with very low linting properties and will stand up to most any cleaning or wiping application.

Blue Smooth Shop Cloths

Essential in the pressroom, pre-press and other cleaning or wiping applications, the blue shop cloths are available in two sizes; 12 x 13 in. folded and 12 x 16.5 in. pop-ups. They are soft and absorbent, exceptionally durable and disposable.

White Textured Cloth Wipes

The white cloth wipes are versatile with a textured side that can trap and remove thick and gooey liquids and are great for scrubbing away built up contaminants without damaging the underlying surface. Available in 12 x 13 in. quarter fold sheets, these wipes can handle most any scrubbing application.

Go to Dupont Sontara PDF

4 x 4 Pads and 8 x 8 Wipes

WipeMates® 4 x 4 pads and 8 x 8 wipes are made of 100% cotton with low lint properties. There are no binders or chemical additives. Both the pads and wipes are very soft and absorbent and will not scratch even the most delicate surfaces. They are great for camera room operations, plate making, stripping and other pressroom operations.

Go to WipeMates PDF

Absorbent Socks

Around your equipment, under your machinery, these versatile WipeMates® absorbent socks can be used to absorb and contain leaks or spills of all kinds. Available in two types, general purpose (3 x 42") and oil only (3 x 48"). These absorbent socks can absorb up to 12 times their weight, up to 10 pounds in liquid, depending on the type of fluid.

Cheesecloth

Milled specifically for graphic arts applications and hospital grade clean, WipeMates® cheesecloth is ideal for applying gums and buffing plates to a streak free finish. Available in rolls of 120 30 x 36" sheets.

Go to WipeMates PDF

LITHO EQUIPMENT

As a supplier of precision-engineered systems for the printing and packaging industries, PRI's high-performance systems improve bottom-line profitability by adding value to your existing operations and improved quality to your services.

The Air Blanket® infrared drying system ensures the immediate drying of water-based inks and coatings for in-line finishing.

The uniquely designed Air Blanket® litho infrared drying system combines maximum efficiency short wave infrared heat energy and a patented air management system which incorporates high velocity air jets and higher volume air exhaust.

The reflectorized short-wave infrared lamps are installed diagonally to the machine direction providing complete heat coverage. The variable intensity lamps can be zoned to specific needs, saving energy.

By accelerating the drying of ink and water-based coatings, the Air Blanket® infrared drying system adds value to your printing or packaging operation, making it possible to efficiently produce high quality graphics.

The Zone™ ultraviolet curing system ensures the immediate curing of ultraviolet inks and coatings for in-line processing.

The Zone™ ultraviolet curing system offers variable lamp control and a continuous air management system not found in any other UV design. The patented air-cooled design eliminates the operating costs associated with water-cooled systems.

The uniquely designed Zone™ UV curing system features individually controlled UV lamps allowing flexibility for various widths and coverages. Each lamp can be independently turned on or off and varied in intensity with the touch of a button. No moving parts to wear out!

This system can save up to 35% in yearly energy costs over conventional water-cooled systems. Additionally, other UV systems can cost as much as 50% more than the Zone™ UV curing system.

The 'Cold' ultraviolet curing system ensures the immediate curing of ultraviolet inks and coatings for in-line processing.

The uniquely designed 'Cold' ultraviolet curing system utilizes chilled water to cool the lamp head, as well as filter out the majority of unwanted IR heat, while allowing the UV energy to pass through and cure the UV inks and coatings.

Single lamp interdeck systems can be easily removed for placement in alternate docking stations. Multi-lamp configuration allows for curing at higher production speeds and end-of-press curing of hybrid inks.

By efficiently curing ultraviolet coatings and inks, the 'Cold'™ ultraviolet curing system adds value to your packaging or printing operation, making it possible to efficiently produce high quality graphics with in-line processing.

The Quik Dry® infrared drying system makes fast printing possible, while drastically reducing the amount of powder normally needed.

Ink drying times are productivity's worst enemy. Modern offset presses are increasing their production speed while ink drying times have remained almost unchanged.

The Quik Dry™ infrared drying system uses short wave IR lamps to accelerate the oxygenation of the ink. Combined with warm air this effectively dries and stiffens the inks not only on the surface but within the ink as well.

Reduced drying time decreases stacks of printed sheets drying all around the valuable floor space of the shop.

The AIRS® automated impurity removal system makes the job of removing hickeys simple and fast. Reducing paper waste and production time while increasing overall quality is how AIRS makes dollars and sense.

Reduce the waste that is normally associated with hickeys. Less overage figured in the job means lower cost per job and increased profit.

The less time that an operator spends chasing hickeys, the more time he can spend on ensuring the quality of the printed piece.

In the modern pressroom, every advantage is needed to maintain competitiveness in the market place. AIRS technology delivers low maintenance, high dependability, and a quick return on investment.

By offering the ability to flexo print or coat on your litho press, the Zebra™ flexo printing/coating system adds value to your operations, making it possible to efficiently produce higher quality graphics.

The patented Zebra™ flexo printing/coating system provides in-line printing and coating of all types of flexo inks and coating from any printing unit.

This revolutionary unit will turn any printing tower into an anilox coating tower. By joining with the blanket cylinder of the print tower, the system allows you to apply coatings or flexo inks via the blanket or a flexo plate.

FLEXO EQUIPMENT

The Air Blanket® flexo infrared drying system ensures the immediate drying of water-based inks, varnishes, and coatings for in-line finishing.

The uniquely designed Air Blanket® flexo infrared drying system combines maximum efficiency short wave infrared heat energy and a patented air management system which incorporates high velocity air jets and higher volume air exhaust.

This patented system dramatically increases drying and production speed. Additionally, PRI clients have discovered that most of their multi-pass jobs can be run in a single pass at full productions speeds.

By efficiently drying water-based colors, varnishes, or coatings, the Air Blanket® infrared drying system adds value to your flexo or converting operation, making it possible to efficiently produce high quality graphics with inline finishing.

The Zone™ ultraviolet curing system ensures the immediate curing of ultraviolet varnishes and coatings for in-line finishing.

The Zone™ ultraviolet curing system offers variable lamp control and a continuous air management system not found in any other UV design. The patented air-cooled design eliminates the operating costs associated with water-cooled systems.

The uniquely designed Zone™ UV curing system features individually controlled UV lamps allowing flexibility for various widths and coverages. Each lamp can be independently turned on or off and varied in intensity with the touch of a button. No moving parts to wear out!

This system can save up to 35% in yearly energy costs over conventional water-cooled systems. Additionally, other UV systems can cost as much as 50% more than the Zone™ UV curing system.