Pressroom Solutions

Fujifilm has a long history in the development of chemistry for pre-press and pressroom applications through its Fuji Hunt manufacturing operation. PRESSMAX pressroom solutions are designed to optimize the performance of your pressroom and your print through a complete range of founts, washes, coatings, sprays, silicones, glues and auxiliaries


****

PressMax Pressroom Founts
PressMax Washes

PRESSMAX Coatings


PRESSMAX Glues

****


PressMax Pressroom Founts
FountMax Green 10.20

Standard fountain solution for coldset printing


Standard fountain solution for coldset printing suitable for all water qualities, approved by all major press manufacturers and especially suited to super wide format presses.


Stable ink/water balance
- Consistent print quality
- No over-emulsification
- Wide printing latitude

Quick start up
- Reduced paper waste
- Cost saving

Corrosion inhibited
- Avoids corrosion of bearings, plate cylinders and other parts of the press
- Longer press life

Reduced build up by printing half web
- Less maintenance after paper format changes
- Less down time

FountMax Blue 30.10 PRO-T

Standard fountain solution for Brillia HD PRO-T


Standard fountain solution for sheetfed printing, recommended for the on-press development of Brillia HD PRO-T for excellent printing performance and plate protection


Recommended for the Brillia HD PRO-T plate
- Assures excellent printing performance and plate protection

Avoid calcium build up on rollers and blankets
- Reduced standstills
- Increased production

Minimum dampening feed
- Cost effective use of fountain solution concentrate and isopropanol or IPAFIX

Stable ink/water balance
- Consistent print quality
- No over-emulsification
- Wide printing latitude

FountMax Blue 30.21 AF PRO-T

IPA free fountain solution for Brillia HD PRO-T


IPA free fountain solution for sheetfed printing, recommended for the on-press development of Brillia HD PRO-T for excellent printing performance and plate protection


Recommended for the Brillia HD PRO-T plate
- Assures excellent printing performance and plate protection

Reduced ink feedback
- Reduced down time
- Increased production

Avoid calcium build up on roller and blankets
- Reduced standstills
- Increased production

Corrosion inhibited
- Avoids corrosion of bearings, plate cylinders and other parts of the press
- Longer press life

Total elimination of alcohol possible
- Strong cost savings on the purchase of isopropylic alcohol
- Healthier working conditions
- Less emission into the atmosphere
- Reduced fire risks

FountMax Blue 30.30 AF

IPA free fountain solution for sheetfed printing


IPA free fountain solution for sheetfed printing, suitable for all water qualities and approved by all major press manufacturers.


Avoid calcium build up on roller and blankets
- Reduced standstills
- Increased production

Stable ink/water balance
- Consistent print quality
- No over-emulsification
- Wide printing latitude

Strong buffer
- Ensures a stable pH value with varying water qualities and different types of paper

Minimum dampening feed
- Cost effective use of fountain solution concentrate and isopropanol or IPAFIX

Corrosion inhibited
- Avoids corrosion of bearings, plate cylinders and other parts of the press
- Longer press life

FountMax Blue 30.32 AF PRO-T

IPA free fountain solution for sheetfed printing


IPA free fountain solution for sheetfed printing, suitable for all water qualities and approved by all major press manufacturers.


Stable ink/water balance
- Consistent print quality
- No over-emulsification
- Wide printing latitude

Reduced ink feedback
- Reduced down time
- Increased production

Avoid calcium build up on rollers and blankets
- Reduced standstills
- Increased production

Corrosion inhibited
- Avoids corrosion of bearings, plate cylinders and other parts of the press
- Longer press life

Total elimination of alcohol possible
- Strong cost savings on the purchase of isopropylic alcohol
- Healthier working conditions
- Less emission into the atmosphere
- Reduced fire risks

Up


****

PressMax Washes

WashMax 40.10 NM

Roller and blanket wash with medium evaporation for removing conventional inks


WashMax 40.10 NM is a roller and blanket wash with medium evaporation for removing conventional inks. It has very strong cleaning power, is developed for both manual and automatic use and is suitable for use with NBR rubber materials.


Strong ink dissolving power
- Fast acting, less standstills
- Economical in use
- Reduced downtime

Not aggressive to offset plate coating
- Can be used with all plate types

WashMax 60.10 MI

Roller and blanket wash with slow evaporation for removing conventional inks


WashMax 60.10 MI is a roller and blanket wash with slow evaporation for removing conventional inks. It has very strong cleaning power, is developed for both manual and automatic use and is suitable for use with NBR rubber materials.


Free of napthenes, aromatic and chlorinated hydrocarbons
- Safer and lower environmental impact

Not aggressive to offset plate coating
- Can be used with all plate types

Corrosion protected
- No corrosion on press components

WashMax 60.50 MI

Roller and blanket wash with slow evaporation for removing conventional inks


WashMax 60.50 MI is a roller and blanket wash with superb cleaning power and slow evaporation for removing conventional inks. It is water miscible, has been developed for both manual and automatic use, and is suitable for NBR rubber materials.


Free of napthenes, aromatic and chlorinated hydrocarbons
- Safer and lower environmental impact

Stable and spontaneous emulsion with water
- Leaves a dry blanket
- Reduced paper waste
- Cost savings

Strong ink dissolving power
- Fast acting, less standstills
- Economical in use
- Reduced downtime

Not aggressive to offset plate coatings
- Can be used with all plate types

Minimal rubber swelling
- Increased roller and blanket life

WashMax 100.10 MI

Roller and blanket wash with slow evaporation for removing conventional inks


WashMax 100.10 MI is a roller and blanket wash with very strong cleaning power and slow evaporation for removing conventional inks. It is water miscible, has been developed for both manual and automatic use, and is suitable for NBR rubber materials.


Free of napthenes, aromatic and chlorinated hydrocarbons
- Safer and lower environmental impact

Emulsifies with water
- Stable emulsion
- Reduced maintenance
- Cleans away both ink and paper dust

Slow evaporation, high flash point
- Safe to use and low environmental impact
- Limited fire risk
- Less contraints on storage
- Economical in use

Very low odour
- Pleasant working environment

Minimal rubber swelling
- Increased roller and blanket life

WashMax UVC 60.30 MI

Roller and blanket wash with slow evaporation


WashMax UVC 60.30 MI is a roller and blanket wash with very strong cleaning power and slow evaporation. It is water miscible, has been developed for both manual and automatic use, and is suitable for NBR/EPDM rubber materials.


Strong ink dissolving power
- Fast acting, less standstills
- Economical in use
- Reduced downtime

Corrosion protected
- No corrosion on press components

Free of napthenes, aromatic and chlorinated hydrocarbons
- Safer and lower environmental impact

Up


****

PRESSMAX Coatings

CoatMax D 50.11 M

Water based matt coating


CoatMax D 50.11 M is a fast drying water based matt coating for board and paper suitable for double sided applications. It has a smooth surface feel and offers good rub resistance.


Viscosity
Various

Solid content
32 - 36 % depending on viscosity

Rub resistance
> 600 double rubs (Prüfbau Quartant)

Heat seal resistance
Up to 140 C against MS-foil (1 bar/1 sec)

Glueability
With suitable dispersion glue, pretest necessary

CoatMax D 50.30 SM

Water based silk coating


CoatMax D 50.30 SM is a fast drying water based silk coating for board and paper suitable for double sided applications. It also offers good rub resistance.


Viscosity
Various

Solid content
38 - 42 % depending on viscosity

Rub resistance
> 600 double rubs (Prüfbau Quartant)

Heat seal resistance
Up to 140 C against MS-foil (1 bar/1 sec)

Glueability
With suitable dispersion glue, pretest necessary

CoatMax D 50.40 N

Water based neutral coating


CoatMax D 50.40 N is a water based neutral coating for board and paper (especially matt paper), has a neutral surface feel and offers nearly invisible protection. It is suitable for double sided applications and offers good rub resistance.


Viscosity
Various

Solid content
32 - 36 % depending on viscosity

Rub resistance
> 600 double rubs (Prüfbau Quartant)

Heat seal resistance
Up to 160 C against MS-foil (1 bar/1 sec)

Glueability
With suitable dispersion glue, pretest necessary

CoatMax D 50.55 G

Water based gloss coating


CoatMax D 50.55 G is a high gloss coating for board, paper and label paper suitable for double sided applications. It has very good rub resistance and is very fast drying.


Viscosity
Various

Solid content
40 - 44 % depending on viscosity

Rub resistance
> 600 double rubs (Prüfbau Quartant)

Heat seal resistance
Up to 140 C against MS-foil (1 bar/1 sec)

Glueability
With suitable dispersion glue, pretest necessary

CoatMax S 40.81 SG

Water based supergloss coating


CoatMax S 40.81 SG is a medium drying water based supergloss coating for board and paper suitable for single sided applications. It has extreme gloss levels and outstanding brilliance for a water based coating, and offers very good rub resistance.


Viscosity
50 seconds / 20 C / DIN 4 mm

Solid content
40 - 44 % depending on viscosity

Rub resistance
> 600 double rubs (Prüfbau Quartant)

Heat seal resistance
Up to 120 C against MS-foil (1 bar/1 sec)

Glueability
With suitable dispersion glue, pretest necessary

Up


****

PRESSMAX Glues

GlueMax D 90.12 HS

Dispersion-based glue for inline fold glueing for web presses


GlueMax D 90.12 HS is a dispersion-based glue for inline fold glueing for web presses. It produces a transparent, soft and sticky film with good adhesion after drying, and is designed for contact nozzle applications, continuous and intermittent.


Polymer based for heatset application
- Economical in use
- Good adhesion after drying

Rheology/viscosity is adapted for contact glueing
- High wet tack
- No bearding (clean cut-off)
- High adhesion

GlueMax D 90.15 HS

Dispersion-based glue for inline fold glueing for web presses


GlueMax D 90.15 HS is a dispersion-based glue for inline fold glueing for web presses. It produces a transparent, soft and sticky film with good adhesion after drying, and is a high performance adhesive for nozzle application systems.


Polymer based for heatset application
- Economical in use
- Good adhesion after drying

Highly re-emulsifying formulation
- Easy to clean
- Avoids blocking of nozzles and system
- Avoids skin formation on the packaging

Very stable emulsion
- Extended shelve life
- Less blocking in the glueing system

Up